G3220 Lipo/Life Balance Charger For Parrot AR.Drone 2.0

Kenmerken

Conditie: Nieuw

Beschrijving

G3220 Lipo/Life Balance Charger For Parrot AR.Drone 2.0 

 













 

G3220 Balance charger is one of the Li Battery balance charger which easy to use and convenience to mobile. It can support to charge the 2S or 3S LiPo & LiFe (A123). G3220 Balance charger has excellent performance of balance circuit and advanced charger mode, meantime, G3220 Balance charger has kinds of protection function, to make sure the battery is too safe & well-balanced to use.

 

Description:

Item name: G3220 Lipo/Life Balance Charger

Input voltage: DC10-18V

Battery type: LiPo/LiFe(A123)

Battery cells: 2-3S (can only charge one battery each time)

Charger current: 0.5, 1.2A, 2.0A 

Balance precision: <10mV

Voltage precision for full charged: 4.20V ±0.02V


Size: 78mm x 50mm x 20mm
Weight: 60g

 

Features:

If the input voltage is more than 18V or lower than 10V, the charging process will beterminated to protect the charger from being damaged.

Reverse polarity protection between input and output.

Short circuit protection 

Over current protection & Over voltage protection

Input voltage auto-adjust function: when input voltage is lower than 12V, the charger will reset the current to avoid power supply's breakage.

3 LED display currently charging current.

3 green LED display each cell in balancing, bright LED means balancing, un-bright means end of balance.

3 green LED bright all, means the balance and charging are finished, then please disenable the connecting line from the balance charger.

Built-in high-speed balance module

 

Operating steps for G3220 balance charger:

1. Preparing for power adapter or storage battery which matches with this balance charger (voltage: 11-16V, current: ?2.0A), then Connect the power supply to balance charger.

2. Select the type of battery LiPo or LiFe.

3. Select the charging current.

4. Connect the 2S or 3S (LiPo or LiFe battery pack) to the balance charger G3220 to start charging.

5. 3 green LED bright all, means the balance and charging are finished, then pls disenable the connecting line from the               balance charger G3220.

 

Note: Prohibit to connect 2S and 3S together to charge at the same time.

           Do not allow metal wires or other conductive material into the G3220 balance charger.

 

Package included:

1 x G3220 Balance Charger

1 x Adapter

 

Bezoek onze webwinkel voor meer interessante producten!