Corona R6FA-SB 2.4Ghz FASST Compatible S.BUS Receiver

Kenmerken

Conditie: Nieuw

Beschrijving

Corona R6FA-SB 2.4Ghz FASST Compatible S.BUS Receiver

Description:

The CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver is designed to use with FUTABA FASST 2.4GHz transmitters, such as 3PM,3PKS,3VCS,3GR,4PK(S),TM7, TM8, TM10, TM14 or T6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG. R4FA-SB and R6FA-SB receivers supply more useful mode for user. Firstly both R4FA-SB and R6FA-SB support FUTABA FASST not only air system but also surface system. Secondly R4FA-SB support 7-channels continuous PPM(both positive and negative) output ,RSSI output and S.BUS output, R6FA-SB support 6 channels high speed PPM(HS) mode optimize the helicopter fast response control and S.BUS output.

Under S.BUS output mode, both R4FA-SB and R6FA-SB supply 12 proportional channels and 2 DG channels. It means that R4FA-SB or R6FA-SB become 14-channel receiver when use S.BUS output.

Specification:

Brand Name: Corona

Item Name: R6FA-SB

Operating Current: 50mA max

Operating Voltage: 3.6 ~10V

Sensitivity: About -100dBm

Operation Temperature:  -10~80  °C

Dimensions: 48x27x12mm

Weight: 11g

Latency:

R4FA-SB’s description:

 - 14mS for independent 4 channels output and S.BUS output @ FASST multi-channel mode

 - 21mS for Continuous PPM output and RSSI output@ FASST multi-channel mode

 - 16mS for independent 4 channels output and S.BUS output @ FASST 7ch mode

 - 24mS for Continuous PPM output and RSSI output@ FASST 7ch mode

 - 14mS for independent 3 channels output@ FASST surface system C1 CODE mode

R6FA-SB’s description:

 - 7mS for independent 6 channels (HS)output@ FASST multi-channel mode

 - 14mS for independent 7 channels (LS)output and S.BUS output @ FASST multi-channel mode

 - 8ms for independent 6 channels (HS)output@ FASST 7ch mode

 - 16mS for independent 7 channels (LS)output and S.BUS output @ FASST 7ch mode

 - 14ms for independent 3 channels output@ FASST surface system C1 CODE mode 

Bind Procedure:

• Turn on the FASST transmitter

• Connect the battery to the receiver while pressing receiver’s F/S button.

• The Dual-color LED’s continuous will cycle through the following:

• Red LED light (searching radio signal)

• Green LED light (acquired the radio signal)

• Red LED off (bind ok)

• Green LED flashes 10 times (ID store in memory)

• Green LED lights solid (normally operation) 

Note: FASST surface system take a bit more time to complete the bind procedure. 

Package Included: 

1x Corona R6FA-SB receiver

Bezoek onze webwinkel voor meer interessante producten!