beamer 3M 9200IC Plus Digital Wall Display | Touchboards

Kenmerken

Conditie: Gebruikt

Type: Home Theater beamer

Technologie: Overige technologieën

Resolutie: 1080p (Full HD)

Beschrijving

beamer 3M 9200IC Plus Digital Wall Display | Touchboards

de beamer lamp is zo goed als nieuw zit 25 draai uren op.

er zit ook nog eens een nieuwe lamp er bij.

de lamp gaat ongeveer 2500 tot 3000 uur mee.

6 inputs*VGA
Component
DVI-D
DVI-A
RCA
S-Video
Silicon Optix Realta HQV (Hollywood Quality Video)
Enhanced Control through New Menu
USB connectivity Single cable gives you:*e-Beam
Remote Mouse
Enhanced RS-232 communication for Controllers
Faster Operation
Full support For High Definition Video up to 1080i
Adjustable Audio Delay
New Menu Button Board for Display Control
New Remote Control for Display Control
Multimode PIP (Picture in Picture) Support
Fully Configurable Audio Input Control
More Robust and Reliable Hardware
VIDEO*VGA Supports inputs up to SXGA (1280x1024) 60Hz
Component Supports Component inputs up to 1080i High Definition resolutions.

Supports nearly all NTSC, PAL, & Secam Formats. DVI-I Single DVI connector supports DVI-D (Digital) and DVI-A (Analog).

With a Y cable it is possible to have both connected.
Will serve as another VGA with a DVI to VGA cable.
This will let you run 2 computers on the analog inputs and 1 more on DVI for a total of 3 computer inputs with the Y cable. RCA Video Standard Composite RCA Video Input.

Supports NTSC, PAL, & Secam.
No HD Support S-Video Standard S-Video Input.

Supports NTSC, PAL, & Secam formats.
No HD support.

AUDIO*3.5 mm Stereo Mini Input There are two 3.5mm stereo jacks.

Labeled Stereo Mini 1 and 2. RCA Audio Input Standard RCA Audio Input with Left and Right Jacks.

Also supports Mono Input through Left RCA Jack. RCA Audio Output Audio outputs with Audio Delay.

DWD Audio Controls such as volume affect the Output.

Computer Interface*USB single connector for all devices.

We have a 4 port USB hub built into the board.
Through this connector you get e-Beam, Remote Mouse, and Upgrade functionality. Network Standard Ethernet Jack.

Provides Upgrade and Future Monitoring Capabilities. Serial RS-232 provides Communication to the board and slow upgrade functionality.