0.5A+1A+2A JUWEI USB Aging Discharger Test Instrumentatio...

Kenmerken

Conditie: Nieuw

Beschrijving

0.5A+1A+2A JUWEI USB Aging Discharger Test Instrumentation Electronic Load Device

This Electronic Load Device Set included three kinds of specifications: 0.5A, 1A, 2A in package

Description:

JUWEI specially crafted: you can easily test mobile power charging treasure, cell phone charger, USB power supply output current is standard, as long as the USB connection on top of the line.

And can move the power supply and USB power adapter do aging test, A full set of gear can be arbitrarily assembled into a variety of discharge current.

Stitching Example: 3 x 1A splicing equal 3A.

Stitching Example:

According to the following additions like the way you can be spliced into the current position you want:

1)    0.5A=0.5A

2)    1A=1A

3)    2A=2A

4)    2.5A=2A+0.5A

5)    3A=2A+1A

6)    3.5A=2A+1A+0.5A

7)    6.5A=2A+2A+2A+0.5A
These measurements are fixed and can not substitute for each other, you need much current can buy together multiple load device for use with.

Application:

You can easily test mobile power charging treasure, cell phone charger, USB power supply output current is standard, as long as the USB connection on top of the line. And can move the power supply and USB power adapter do aging test, aging test discharge resistor will be hot, the temperature at 80 ~ 85 ?, please note that the anti-hot.

After discharging:

We can get the battery capacity of mobile power,as the tester shows.

Tips:



1,remind this will be very hot after use, please be careful!!!

 

2, when the load is operating, minding resistance due to a large current would have a very, very high temperatures, so in the course, and just a short time after use, can absolutely do human contact gold metal cooling section to avoid being scalded! And do not let flammable materials contact test device to avoid fire! Short course must be highly vigilant!

 

3, taking into account the special nature of heat resistance, there will be a little white smoke and the smell of the phenomenon for some time after the initial power-use, because the outer paint also contains a very small amount of water, electricity high temperature heat, the water evaporates forming white smoke outside paint by high temperature baking odors phenomenon, after a period of time to completely disappear. This phenomenon is inevitable, is normal, do not worry it will damage the load tester, ease of use.



Package included:

1 x 0.5A JUWEI USB Aging Discharger Test Instrumentation Electronic Load Device

1 x 1A JUWEI USB Aging Discharger Test Instrumentation Electronic Load Device

1 x 2A JUWEI USB Aging Discharger Test Instrumentation Electronic Load Device



Bezoek onze webwinkel voor meer interessante producten!